What kind of pneumatic actuator should be used for the valve

The size of the pneumatic actuator in the valve device and connection is designed according to the requirements of the specification, which can have universal characteristics on the specification, can be exchanged with the ordinary pneumatic actuator each other, which is also possible because they are the same on the standard, there is no other difference. And it can be installed according to the needs of users, such as matching solenoid valve, returner and manual operation of the equipment.

Pneumatic actuator is thrust through compressed air, the output thrust is large, high efficiency, stable and safe. The executive organization and adjusting organization of the pneumatic actuator are unified, so the structure is simple, and compared with other actuators of the same standard, the lightest weight. With explosion-proof function, in the work environment requiring high safety factor, such as power plants and other places, has been very good use and long use time. Pneumatic actuator can be divided into single effect test pneumatic actuator and double effect test pneumatic actuator.

The pneumatic actuator is able to operate in different directions, which is able to select for the needs of the valve, and can rotate clockwise or counterclockwise. The reason why the pneumatic actuator can rotate in different directions is that the hole of the shaft mounted equipment at the bottom of the pneumatic actuator is in the shape of a double square, which is to facilitate the 45 degree Angle of the device.