The reason why the solenoid valve cannot be easily closed during operation

After the analysis of the above six conditions and the ancestors to deal with the work experience, we can get the result is that the solenoid valve in the use of the process will have any problems, but very happy is that we have a clear solution to various problems, which is more trustworthy for consumers this product. With the continuous expansion of the scope of application of the solenoid valve, it may also be necessary for scientific and technical personnel and relevant shops to do more work and prepare in advance to meet market demand.

1. The seal of the main valve core is damaged:

Solution: Advocate disassembling seals.

2, throttle hole balance hole obstruction:

Solution: Clean it up now.

3, viscosity or liquid temperature is too high:

Solution: Advocate the replacement of the relevant professional pulse valve solenoid valve.

4, there is debris into the solenoid valve spool production:

Solution: This situation advocates cleaning.

5, torsion spring deformation:

Solution: Advocate disassembling and replacing the torsion spring.

6, the output power is too high to form the service life is now up:

Solution: Advocate changing the product or upgrading the product.

Solenoid valve sometimes in the work of the solenoid valve can not cancel the situation, perhaps the reason may be: the main valve core or iron core seal has been destroyed, the liquid temperature, viscosity is not too high, there is residue into the solenoid valve, torsion spring service life has arrived or deformation. What are the solutions to these problems? The next step will analyze the reasons why the solenoid valve with signal response can not be turned off and the solution that the solenoid valve can not be turned off.