Air filter secrets you may not know

By fixing the compressor and using the right air handling products, you can reduce both application maintenance and energy costs. In addition, as a further advantage, the compressor system you are installing may ensure a longer service life.

The air in the atmosphere is naturally polluted. These include water vapor, oil vapor, liquid oil, liquid water, pipe stains/rust, water aerosols, natural gas aerosols, microorganisms, and air pollution. The presence of these pollutants requires an air purifier (also known as an air handling product or a compressed air assist product) and means the reduction or complete removal of pollutants from compressed air.

What to do with compressed air?

Many compressed air filters can be used to process compressed air to the purity level required for your application, and depending on the use, installing compressed air may require some or all parts or all.

To control contaminants and condensation, treat compressed air in the following three basic steps: drying; Filter; Leave.

The compressed air filter brand products related to the above procedures are:

Step 1 Dry. Air dryers remove water vapor from compressed air, helping to avoid potential problems on the production line. Equipment failure, corrosion, product rot, etc

2. Filter. Filters are used to remove particles, frozen condensates and oils from compressed air after compression has occurred. The specific types are particle filter, oil feed filter and oil vapor filter.

3. Oil-water separator. The facility separates the condensate generated in the oil and compressed air, ensuring that you can dispose of the condensate in an economical and environmentally friendly manner.

Why deal with compressed air?

Although each compressed air filter is unique, all systems must handle compressed air correctly. By keeping moisture, dust, and particulate matter in the system, the efficiency of the system can be reduced and downtime can be increased to maintain the facility's aerodynamics.