What is the role of industrial precision air filters?

In our more than ten years of market research found that in the spray industry, the compressed air that does not meet the standard will increase the defective rate by at least 5%, which is a headache.

The compressed precision air filter is referred to as the precision filter, which is used to dry the impurities in the compressed air filter, and is widely used in electronic power, food and medicine, semiconductor, automobile manufacturing and other industries.

The impurities referred to here generally refer to solid particles, dust, microorganisms and a certain amount of water; It should be mentioned here that the general compressed air filter is unable to filter oil, and it is necessary to use an oil and gas separator or use an oil-free air compressor. The oil in the compressed air will adhere to the precision filter and cannot be excluded, reducing the filtration effect of the precision filter.

Dust and microorganisms will contact food and pharmaceutical raw materials to contaminate products, greater harm to users.

Water and dust will cause harm to the spraying process, resulting in bad conditions such as pitted fish eyes.

In many cases, dust and water can also damage gas equipment and pneumatic components, such as placement machines, drilling machines, solenoid valves and so on.

A large part of these common hazards are caused by pollutants in compressed air, but they have not received enough attention.

Because equipment damage is unavoidable, compressed air is not the only influencing factor, but it is definitely a very large influencing factor.

That is why we recommend compressed air users to configure precision filters; Generally speaking, a non-harsh working condition, a precision filter can be used for at least 2 years, only need to replace the filter element, very cost-effective.