Fault representation and treatment of screw air compressor air filter

The air filter consists of an air filter assembly and a filter element. The outside is connected with the air compressor intake valve through joints and threaded pipes to filter impurities such as dust and particles into the air. Different air compressor types can choose the air filter to be installed according to the intake volume. As one of the five vulnerable parts of screw air compressor, when it fails to handle properly, it will directly affect the normal operation of air compressor and the safety of equipment. To this end, we summarize the screw air compressor air filter problems and treatment methods, hoping to help you.

First, the air filter problem appearance: filter blocking

Blocked air filter will lose the energy consumption of air compressor, spoil the electric energy, and simply be penetrated by dust. Excess dust enters the interior of the air compressor, which will affect the service life of the air compressor oil and also lead to the blockage of the "oil and gas separator".

Two, air filter fault treatment method:

1. The filter element is the core component of the filter. They are made of special materials and are vulnerable. They need special maintenance.

2. When the filter passes through a long time, the filter element has blocked certain impurities, which will lead to the addition of pressure and the reduction of flow, at this time, it needs to be cleaned in time.

3. When cleaning, we must pay attention to the deformation or damage of the filter element.

The filter paper in the equipment is also a key one, and the filter paper in the high-quality filter equipment is generally made of microfiber paper containing synthetic resin, which can effectively filter impurities and has a strong sewage storage ability. The equipment also requires the strength of filter paper. Due to the large air flow, the strength of filter paper can resist strong airflow to ensure filtration efficiency and extend the service life of equipment.

The porosity of filter paper is about 1μm. Generally, outer dust should be removed every 1000 hours. The solution is to blow the dust from the inside out with low pressure air. The air cleaner is equipped with a differential pressure monitor. If the air filter on the display panel is blocked, it is necessary to clean or replace the air filter.

The above is the related introduction of the screw air compressor air filter problem appearance and treatment methods, to understand more and more professional relevant information, please continue to pay attention to us! Yilang air compressor has developed and produced air compressors for 20 years. It is a national high-tech enterprise, specializing in screw air compressors, oil-free air compressors, two-stage air compressors, permanent magnet frequency air compressors, energy-saving screw machines, etc., providing supporting air compressor oil, so that your equipment is more healthy and safe!