What is the most critical problem with damaged pneumatic actuators

1.The setting value of the torque limiting mechanism is incorrect, and the stopped torque is less than its setting value, resulting in continuous excessive torque and stopping the motor from rotating.

2. Due to some reasons, the circuit of the torque limiting mechanism fails, resulting in excessive torque.

3, the use of ambient temperature is high, relatively reduce the heat capacity of the motor.

4, the voltage of the power supply is too low, so that it can not obtain the required torque, causing the motor to stop rotating.

5, continuous use, the heat savings generated exceeds the allowable temperature appreciation of the motor.

One of the key problems of pneumatic actuator damage is load. Its load situation mainly has the above problems.